Table 6-5 Dip Switch On The Sub-Esw-2Ge Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
100M
(GE1/GE2
electrical
interface)
1000M
(GE1/GE2
electrical
interface)
SD
(GE1/GE2)
LNK/ACT
(GE1/GE2 optical
interface)
6.1.6 DIP switch
Table 6-5 lists configurations of the DIP switch on the SUB-ESW-2GE card.

Table 6-5 DIP switch on the SUB-ESW-2GE card

SW1
No. Name
1 NMS
2 BP
6.1.7 Specifications
Table 6-6 lists parameters of the ESW-2GE card.
LED Color
Green
Green
Green
Green
Function
Set management
mode.
Set chassis and
backplane type.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
GE1/GE2 electrical interface 100 Mbit/s LED
 Green: the GE1/GE2 electrical interface is working at
100 Mbit/s.

Off: the GE1/GE2 electrical interface is working at 10
Mbit/s.
GE1/GE2 electrical interface 1000 Mbit/s LED

Green: the GE1/GE2 electrical interface is working at
1000 Mbit/s.

Off: the GE1/GE2 electrical interface is working at 100
Mbit/s or 10 Mbit/s.
GE1/GE2 optical interface signal LED

Green: optical signals are detected.

Off: no optical signals are detected.
GE1/GE2 optical interface working LED

Green: the GE1/GE2 optical interface is properly
connected.

Off: the GE1/GE2 optical interface is improperly
connected or disconnected.

Blinking green: the GE1/GE2 optical interface is
receiving or sending data.
Status
ON NMS-SLA, slave control device
OFF NMS-AUTO, automatically recognizable
by slot number
ON BP-3000, used on the RC3000-15
OFF BP-3500E&006, used on the
OPCOM3500E and RC006-12
6 Ethernet switching card
Description
Description
50