Figure 13-11 Fc/Pc Fiber Connector; Figure 13-12 Ethernet Cable; Table 13-11 Wiring Of The 100/1000 Mbit/S Straight-Through Cable - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

Figure 13-11 FC/PC fiber connector

When connecting or removing the FC/PC optical connector, operate the fiber as below:


13.8 Ethernet cable
13.8.1 Appearance
Figure 13-12 shows the Ethernet cable.

Figure 13-12 Ethernet cable

13.8.2 Wiring
Table 13-11 lists wiring of the 100/1000 Mbit/s straight-through cable.

Table 13-11 Wiring of the 100/1000 Mbit/s straight-through cable

PIN 1
PIN 2
PIN 3
Align the head of the fiber jumper with the optical interface to avoid damaging the
ceramic inner tube, and insert the optical fiber into the interface gently to the bottom.
Then, rotate the screw set clockwise tightly.
To remove the fiber, rotate the screw set anticlockwise. When the screw set is loose, pull
the fiber out.
Connector 1 (RJ45)
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Connector 2 (RJ45)
PIN 1
PIN 2
PIN 3
Color
White/Orange Twisted pair
Orange
White/Green Twisted pair
13 Cables
Remarks
200