Leds; Dip Switch; Table 9-10 Leds On The 8Rs232H Card; Table 9-11 Configurations Of The Dip Switch On The 8Rs232H Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
Interface rate

9.2.5 LEDs

Table 9-10 lists LEDs on the 8RS232H card.

Table 9-10 LEDs on the 8RS232H card

PWR
SYS
TD1–TD8
RD1–RD8

9.2.6 DIP switch

Table 9-11 lists configurations of the DIP switch on the 8RS232H card.

Table 9-11 Configurations of the DIP switch on the 8RS232H card

KEY1
Parameter
LED Color
Green
Green
Green
Green
SW1 Function
Enter or quit
ISP mode.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
The interface rate is related to the collection frequency:
 The interface rate is up to 9.6 kbit/s when the collection
frequency is 64 kHz.

The interface rate is up to 19.2 kbit/s when the collection
frequency is 128 kHz.

The interface rate is up to 38.46 kbit/s when the collection
frequency is 256 kHz.
Power LED
 Green: the power supply is normal.
 Off: the power supply is abnormal.
System status LED
 Green: the system is working improperly.
 Off: the system is working improperly.
 Blinking green: the system is working properly.
Sending data LED
 Blinking green: the corresponding channel is sending
data. The blinking frequency is related to the volume of
data being sent.
 Off: the corresponding channel is not sending data.
Receiving data LED
 Blinking green: the corresponding channel is receiving
data. The blinking frequency is related to the volume of
data being received.

Off: the corresponding channel is not receiving data.
Status
ON Enter ISP mode. You can upgrade MCU program
through the serial interface on the backplane.
OFF Enter normal working mode, and the card works
properly.
9 Asynchronous data cards
Description
Description
Description
123