Leds; Internal Jumper; Table 10-15 Leds On The 8V24H Card; Table 10-16 Internal Jumper Used By The 8V24H Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

10.3.5 LEDs

Table 10-15 lists LEDs on the 8V24H card.

Table 10-15 LEDs on the 8V24H card

PWR
SYS
TD1–TD8
RD1–RD8

10.3.6 Internal jumper

Table 10-16 lists the internal jumper used by the 8V24H card.

Table 10-16 Internal jumper used by the 8V24H card

Jumper
JP1


LED Color
Green
Green
Green
Green
Function
Configure the
mode for
downloading
the MCU
program.
By default, JP1 is disconnected; namely, MCU is in normal working mode.
After upgrade, JP1 must be disconnected; otherwise, the 8V24H card will
malfunction.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Power LED

Green: the power supply is normal.

Off: the power supply is abnormal.
System status LED

Green: the system is working improperly.

Off: the system is working improperly.

Blinking green: the system is working properly.
Sending data LED
 Blinking green: the corresponding channel is sending
data. The blinking frequency is related to the volume of
data being sent.

Off: the corresponding channel is not sending data.
Receiving data LED

Blinking green: the corresponding channel is receiving
data. The blinking frequency is related to the volume of
data being received.

Off: the corresponding channel is not receiving data.
Status
Enter ISP mode. In this mode, the
Short-circuited
RC3000-15 is waiting to be upgraded.
You can upgrade MCU program through
the serial interface on the backplane.
Disconnected Enter normal working mode.
Description
Description
10 Data cards
144