Table 6-3 Parameters Of The Ge1/Ge2 Optical Interface On The Esw-2Ge Card; Table 6-4 Leds On The Sub-Esw-2Ge Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
Table 6-3 lists parameters of the GE1/GE2 optical interface on the ESW-2GE card.

Table 6-3 Parameters of the GE1/GE2 optical interface on the ESW-2GE card

Connector type
Interface rate
6.1.5 LEDs
Table 6-4 lists LEDs on the SUB-ESW-2GE card.

Table 6-4 LEDs on the SUB-ESW-2GE card

PWR
SYS
LNK/ACT
(1–13)
FDX
(GE1/GE2)
LNK/ACT
(GE1/GE2
electrical
interface)
Parameter
LC
1000 Mbit/s
LED Color
Green
Green
Green
Green
Green
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Power LED
 Green: the power supply is normal.
 Off: the power supply is abnormal.
System status LED
 Blinking green: the system is working properly.
 Off: the system is working improperly.
Link working LED for slots 1–6 and 9–13 on the
backplane
 Green: the link interface is properly connected.
 Off: the link interface is improperly connected or
disconnected.
 Blinking green: the link interface is receiving or sending
data.
The LNK/ACT LED for the Ethernet switching card
is steadily Green.
GE1/GE2 electrical interface duplex mode LED
 Green: the GE1/GE2 electrical interface is working in
full duplex.
 Off: the GE1/GE2 electrical interface is working in half
duplex.
GE1/GE2 electrical interface working LED
 Green: the GE1/GE2 electrical interface is properly
connected.
 Off: the GE1/GE2 electrical interface improperly
connected or disconnected.

Blinking green: the GE1/GE2 electrical interface is
receiving or sending data.
6 Ethernet switching card
Description
49