Figure 1-2 Rear Appearance - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

Figure 1-2 Rear appearance

1
2
3
4
5
6
7 and 9
8
No. Name
Service card slots
Power supply card slots
Heat dissipation area
Alarm terminal
Fan power interface
Fan monitoring
interface
Ground terminals
DC power interface
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Slots 1–6 and 9–13 are inserted into with service
cards.
Slots 14–15 are inserted with power supply cards.
The fan is installed on the top of the heat
dissipation area.
Four-pin spring terminal block, supporting 1 way
of alarm input and 1 way of alarm output
Between two lines of the alarm output
terminal, the DC voltage must be within 30
V and the DC current must be within 1 A;
the AC voltage must be within 125 V and
the AC current must be within 0.3 A.
Supply power for the fan.
Be connected to the fan and monitor the fan
status.
Be used for grounding.
Input DC power.
1 Chassis
2