Table 7-11 Parameters Of The Electrical Interface On The P240-4Fe Card; Table 7-12 Leds On The P240-4Fe Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
Model Interface
type
-SS2 SC


Table 7-11 lists parameters of the electrical interface on the P240-4FE card.

Table 7-11 Parameters of the electrical interface on the P240-4FE card

Connector type
Interface rate
Duplex mode
Flow control
MTU
Wiring
Compliant standard
7.2.5 LEDs
Table 7-12 list LEDs on the P240-4FE card.

Table 7-12 LEDs on the P240-4FE card

PWR
SYS
Working
wavelength
(nm)
T1310/
R1550
The Device model column is omitted with "P240-4FE" before hyphen (-), and the
full form is "P240-4FE + Device model", such as P240-4FE-M.
The transmission distance is the maximum one under typical fiber conditions, so it
depends on actual network situations.
Parameter
LED Color
Green
Green
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Tx optical Rx
power sensitivit
(dBm) y (dBm)
-5 to 0 -35
RJ45
10/100 Mbit/s auto-negotiation
Full/Half duplex auto-negotiation

Support IEEE 802.3x flow control in full duplex.

Support back pressure flow control in half duplex.
1536 bytes
Auto-MDI/MDIX
IEEE 802.3x, IEEE 802.3u, IEEE 802.1q, and MSAN-126
Power LED

Green: the power supply is normal.
 Off: the power supply is abnormal.
System status LED
 Blinking green: the system is working properly.
 Off: the system is working improperly.
Extincti Min.
on ratio overload
(dBm)
> 8.2 -3
Description
Description
7 PDH cards
Transmis
sion
distance
(km)
10–60
61