Table 12-10 Parameters Of The St Interface; Table 12-11 Leds On The Tp Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

Table 12-10 Parameters of the ST interface

Interface type
Typical loss
Pluggable times
Temperature stability
Axial load
Service bandwidth
Clock frequency
Jitter
Wander
Output level
Center emission
wavelength
Rx sensitivity
Fiber
Maximum transmission
distance (dependent on
link signal attenuation)
Lightning protection
level
12.2.5 LEDs
Table 12-11 lists LEDs on the TP card.

Table 12-11 LEDs on the TP card

PWR
Parameter
Multi-mode dual-fiber ST (namely, BFOC/2.5) female
interface
0.3 dB
< 0.3 dB: 1000 times
-40 to 75° C: incremental loss < 0.3 dB
35 lb
N× 64 kbit/s, N = 1–12
2048 kbit/s (± 100 ppm)


± 250ns (± 0.5 UI)



830± 40 nm
BER < 1.0E-9 (namely, no bit error): the average optical
power is -28 dBm.
850 nm MMF, 50 μm or 62.5 μm
2–4 km


LED Color
Green
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Output: ± 50ns (± 0.1 UI)
Input tolerance: ± 100ns
Average optical power of 50 μm fiber: -23.0 to -11.0 dBm
Average optical power of 62.5 μm fiber: -19.0 to -11.0 dBm
Optical signal in ON status indicates logical 1; logical 1
level which is smaller than 10% indicates logical 0.
Contact discharge: ± 8 kV
Air discharge: ± 15 kV
Power LED
 Green: the power supply is normal.
 Off: the power supply is abnormal.
12 Telecontrol service cards
Description
Description
185