Figure 8-3 Interface Pins Of The Interface On The E&M - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
Frequency distortion
Total distortion (1020
Hz)
Gain change according to
level
Degree of unbalance
about earth
Idle channel noise
Feeding voltage (on-
hook)
Feeding current
Ringing voltage
Return loss
Interface PINs
Figure 8-3 shows the interface PINs of the interface on the E&M. Table 8-27 lists PIN
definitions of the interface on the E&M.
Figure 8-3 Interface PINs of the interface on the E&M
Parameter
The Tx (D/A) gain ranges from -17 to 8 dB. The default
value is controlled by an internal jumper. Its step is 0.1 dB.
300–3000 Hz; < 0.5 dB
3000–3400 Hz; < 3.0 dB
0 to -30 dBm0; < 33 dB
-30 to -40 dBm0; < (33–22) dB
-40 to -45 dBm0; < 22 dB
+3 to -40 dBm0; ∆ < 0.5 dB
-40 to -50 dBm0; ∆ < 1.0 dB
-50 to -55 dBm0; ∆ < 3.0 dB
300–600 Hz: > 40 dB
600–2400 Hz: > 46 dB
2400–3400 Hz: > 41 dB
< -67 dBm0p
Typical -48 V
Typical 20 mA
Typical 60 V/30 Hz
300–600 Hz: > 12 dB
600–3400 Hz: > 15 dB
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
8 Voice cards
90