Leds; Internal Jumper; Table 10-33 Leds On The Ht-8Fe16E1; Table 10-34 Internal Jumper Used By The Ht-8Fe16E1 - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
When the FE electrical interface is configured to 10 Mbit/s through auto-negotiation
or manual configuration, it cannot transmit services.

10.6.5 LEDs

Table 10-33 lists LEDs on the HT-8FE16E1.

Table 10-33 LEDs on the HT-8FE16E1

PWR
SYS
100M (1–8)
LNK/ACT (1–8)

10.6.6 Internal jumper

Table 10-34 lists the internal jumper used by the HT-8FE16E1.

Table 10-34 Internal jumper used by the HT-8FE16E1

Jumper
JP101

LED Color
Green
Green
Green
Green
Function
Configure the
mode for
downloading
the MCU
program.
By default, JP101 is disconnected; namely, MCU is in normal working mode.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Power LED
 Green: the power supply is normal.
 Off: the power supply is abnormal.
System status LED
 Blinking green: the system is working properly.
 Off: the system is working improperly.
FE electrical interface rate LED:
 Green: the FE electrical interface is working at 100
Mbit/s.
 Off: the FE electrical interface is working at 10 Mbit/s.
Link working LED
 Green: the link interface is working properly.
 Blinking green: the link interface is receiving or
sending data.
 Off: the link interface is disconnected or is working
improperly.
Status
Short-circuited Enter ISP mode. In this mode, the
RC3000-15 is waiting to be upgraded.
You can upgrade MCU program through
the serial interface on the backplane.
Disconnected Enter normal working mode.
Description
Description
10 Data cards
156