Table 6-6 Parameters Of The Esw-2Ge Card; Table 6-7 Alarms On The Sub-Esw-2Ge Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

Table 6-6 Parameters of the ESW-2GE card

Dimensions
Weight
Power consumption
6.1.8 Alarms
Table 6-7 lists alarms on the SUB-ESW-2GE card.

Table 6-7 Alarms on the SUB-ESW-2GE card

Ethernet interface loopback
alarm
Ethernet interface loopback
clearing alarm
Slot-specified LED ON
alarm
Slot-specified LED OFF
alarm
GE electrical interface
LINKUP alarm
GE electrical interface
LINKDOWN alarm
GE optical interface
RLINKUP alarm
GE optical interface
RLINKDOWN alarm
GE interface connection
alarm
GE interface disconnection
alarm
SFP in-position alarm
SFP out-of-position alarm
Parameter
25 mm (Width) × 225 mm (Depth) × 240 mm (Height)
0.38 kg
< 10 W
Alarm
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Cause
Loopback is detected on
the switching interface.
Loopback is cleared on
the switching interface.
The switching interface
corresponding to a slot
is connected.
The switching interface
corresponding to a slot
is disconnected.
The link is in Link up
status.
The link is in Link down
status.
The link is in Rlink up
status.
The link is in Rlink
down status.
The GE interface is
connected through
Ethernet cable or fiber.
The GE interface is
disconnected.
SFP is in position.
SFP is out of position.
6 Ethernet switching card
Level LED
Major N/A
Major N/A
Major LNK/ACT
Critical LNK/ACT
Major LNK/ACT
Critical LNK/ACT
Major LNK/ACT
Critical LNK/ACT
Prompt N/A
Prompt N/A
Prompt N/A
Prompt N/A
LED
status
N/A
N/A
ON
OFF
ON
OFF
ON
OFF
N/A
N/A
N/A
N/A
51