Specifications; Cables; Table 10-23 Dip Switch On The 4V35H Card; Table 10-24 Parameters Of The 8V35 Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

Table 10-23 DIP switch on the 4V35H card

J3



10.4.7 Specifications

Table 10-24 lists parameters of the 8V35 card.

Table 10-24 Parameters of the 8V35 card

Dimensions
Weight
Power consumption

10.4.8 Cables

Table 10-25 lists the cable used by the 8V35/4V35H card.

Table 10-25 Cable used by the 8V35/4V35H card

8V35
4V35H
For cable definitions, see section 13.14 MUL cable.
SW1 Function
Enter or quit
ISP mode.
J3 is in all OFF status before delivery, so the RC3000-15 can work properly.
After upgrade, J3 must be disconnected; otherwise, the RC3000-15 will
malfunction.
Parameter
Card Recommended cable
CBL-V35-HDB26M/2M34F-D
CBL-V35-HDB26M/M34F-
2m/RoHS
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Status
ON Enter ISP mode. In this mode, the RC3000-15 is
waiting to be upgraded. You can upgrade MCU
program through the serial interface on the
backplane.
OFF Enter normal working mode.
8V35
25 mm (Width) × 225 mm (Depth) × 240 mm (Height)
0.5 kg
8 W
Description
4V35H
2.4 W
Description
DCE cable of HDB26 male interface
to 2 M34 female interfaces
DCE cable of HDB26 male interface
to 1 M34 female interface
10 Data cards
149