Table 12-9 Interfaces On The Tp Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description


12.2.2 Version
RC3000-15-TP
12.2.3 Slots
E.30
The software version DXC card should be V3.3.7 or later.
12.2.4 Interfaces
Interface type
Table 12-9 lists interfaces on the TP card.

Table 12-9 Interfaces on the TP card

1–4 TX/RX
Interface parameter
The ST interface complies with the C37.94 and BFOC/2.5 standards.
Table 12-10 list parameters of the ST interface.
each frame. When N is smaller than 12, data of the used bytes are invalid. The
capacity compression feature makes the services only occupy "1+N" 64K
timeslots. One 64K timeslot transmits the value of N; and N 64K timeslots transmit
valid service data.
When C37.94 services are multiplexed to line-side E1, support PCM30,
PCM30&CRC, PCM31, and PCM31&CRC only, instead of unframed E1.
This card does not provide customers with configurable buttons, DIP switches, or
jumpers.
Card
Chassis version
Interface
Multi-mode dual-fiber
ST (namely, BFOC/2.5)
female interface
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
A
1–6 and 9–13
Type
 4 C37.94 service input/output interfaces
 Each way of services uses 1 Tx interface
and 1 Rx interface.
12 Telecontrol service cards
Version
Slot
Description
184