Specifications; Cables; Table 8-31 Parameters Of The 10E&M Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description



The 10E&M supports an internal jumper J44, which is reserved for Raisecom
technical support engineers only.




8.4.7 Specifications

Table 8-31 lists parameters of the 10E&M card.
Table 8-31 Parameters of the 10E&M card
Dimensions
Weight
Power consumption

8.4.8 Cables

The 10E&M uses the common twisted pair cable with the RJ45 connector, which needs to be
prepared by yourself.
: stand for a 3-pin jumper pin.
: stand for a 2-pin jumper pin.
: stand for a jumper cover, namely, the location for the jumper connection
The jumper enables you to enter the ISP mode, in which you can upgrade the
MCU program through the serial interface on the backplane. In ISP mode, the
system is waiting to be upgraded.
After the upgrade is complete, JP1 must be disconnected; otherwise, the
RC3000-15 cannot work.
By default, the jumper is not jump-connected.
Parameter
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
25 mm (Width) × 225 mm (Depth) × 240 mm (Height)
0.5 kg

< 2.0 W (+5 VDC)

< 0.5 W (-48 VDC)
Description
8 Voice cards
95