Table 13-9 Pin Definitions Of The Alarm Terminal; Table 13-10 Fiber Connectors - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
13.6 Alarm cable
13.6.1 Introduction
The alarm cable is used to connect alarm terminal and other devices to input/output alarm
signals. The RC3000-15 uses a 4-hole spring terminal block.
13.6.2 PIN definitions
Connect the alarm cable according to PIN definitions as described in Table 13-9.

Table 13-9 PIN definitions of the alarm terminal

PIN
1
13.7 Fiber
13.7.1 Connector
Table 13-10 lists fiber connectors.

Table 13-10 Fiber connectors

Local connector
LC/PC
SC/PC
Definition
OUT PIN 1 and PIN 2 are used together
for one way of alarm signals.
 When alarm signals are to be
output, PIN 1 and PIN 2 are
short connected by an internal
relay.
 When no alarm signals are
output, PIN 1 and PIN 2 are
disconnected.
Remote connector
LC/PC
FC/PC
SC/PC
LC/PC
FC/PC
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Fiber
2 mm SMF
2 mm MMF
2 mm SMF
2 mm MMF
2 mm SMF
2 mm MMF
2 mm SMF
2 mm MMF
2 mm SMF
13 Cables
198