Leds; Dip Switch; Table 10-9 Leds On The 8V24 Card; Table 10-10 Dip Switch On The 8V24 Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description
23
24
25
26

10.2.5 LEDs

Table 10-9 lists LEDs on the 8V24 card.

Table 10-9 LEDs on the 8V24 card

PWR
SYS
TX1–TX8
RX1–RX8

10.2.6 DIP switch

Table 10-10 lists the DIP switch on the 8V24 card.

Table 10-10 DIP switch on the 8V24 card

KEY1
HDB26 PIN
GND
GND
GND
GND
LED Color
Green
Green
Green
Green
SW1 Function
Enter or quit
ISP mode.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
PIN definitions
Cable
No.2 way of ground
No.2 way of ground
No.1 way of ground
No.1 way of ground
Power LED

Green: the power supply is normal.
 Off: the power supply is abnormal.
System status LED
 Blinking green: the system is working properly.

Off: the system is working improperly.
Sending data LED

Blinking green: the corresponding channel is sending
data. The blinking frequency is related to the volume of
data being sent.

Off: the corresponding channel is not sending data.
Receiving data LED

Blinking green: the corresponding channel is receiving
data. The blinking frequency is related to the volume of
data being received.

Off: the corresponding channel is not receiving data.
Status
Enter ISP mode. In this mode, the RC3000-15 is
ON
waiting to be upgraded. You can upgrade MCU
program through the serial interface on the
backplane.
Description
Description
Description
10 Data cards
140