Leds; Dip Switch; Table 10-21 Leds On The 8V35 Card; Table 10-22 Dip Switch On The 8V35 Card - Raisecom RC3000-15 Hardware Description

Raisecom
RC3000-15 (P100R001) Hardware Description

10.4.5 LEDs

Table 10-21 lists LEDs on the 8V35 card.

Table 10-21 LEDs on the 8V35 card

PWR
SYS





10.4.6 DIP switch

Table 10-22 lists the DIP switch on the 8V35 card.

Table 10-22 DIP switch on the 8V35 card

KEY1
KEY2


Table 10-23 lists the DIP switch on the 4V35H card.
LED Color
Green
Green
TD1–TD8
Green
(8V35)
TD1–TD4
(4V35H)
RD1–RD8
Green
(8V35)
RD1–RD4
(4V35H)
SW1 Function
Enter or quit
ISP mode.
Reserved
SW1 is in all OFF status before delivery, so the RC3000-15 can work properly.
After upgrade, J9 must be disconnected; otherwise, the RC3000-15 will
malfunction.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Power LED

Green: the power supply is normal.

Off: the power supply is abnormal.
System status LED

Green: the system is working improperly.

Off: the system is working improperly.

Blinking green: the system is working properly.
Sending data LED
 Blinking green: the corresponding channel is sending data.
The blinking frequency is related to the volume of data being
sent.

Off: the corresponding channel is not sending data.
Receiving data LED

Blinking green: the corresponding channel is receiving data.
The blinking frequency is related to the volume of data being
received.

Off: the corresponding channel is not receiving data.
Status
Enter ISP mode. In this mode, the RC3000-15 is
ON
waiting to be upgraded. You can upgrade MCU
program through the serial interface on the
backplane.
OFF Enter normal working mode.
–
Description
Description
10 Data cards
148