Table of Contents
Advertisement
6 Configure Ethernet interfaces
This chapter includes:
Configure timeslots of Ethernet interfaces
Command
config
interface eth <1-8>
timeslot add sdh <1-2> vc12
TSSTRING
show interface eth <1-8>
For example: configure the timeslot of Ethernet interface 2 as {1，3，4，5，6，7，
8，9}
OPCOM3100# config
Configuration mode, one command input per time. End with CTRL-Z.
OPCOM3100(config)# interface eth 2
OPCOM3100(config-eth/2)# timeslot add sdh 1 vc12 1,3-9
Set Successfully
OPCOM3100(config-eth/2)# show interface eth 2
Description
Enter global configuration mode
Enter Ethernet interface configuration mode
<1-8>
serial number of the interface
Configure the mapping of Ethernet interface
and sdh-vc12
Show the timeslots of Ethernet interface
17
Raisecom Technology Co., Ltd
Advertisement
Table of Contents
