BENDIXKing AeroNav 910 Pilot's Manual page 53

Bezel-only Control Input
Functions
Selecting page function keys
(e.g. changing the "major"
pages of FMS, MAP, AUX)
Power on/off
Changing the Primary Nav
Source
Starting the Frequency List
Frequency Swap
When editing data (e.g. FMS waypoint data, chart identifiers)
using touch, virtual keyboards are displayed on the AeroNav.
There are two formats – a numeric keyboard and an alpha
keyboard with a means to switch back and forth between formats.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
Touch screen-only Control
Input Functions
Map panning
Graphical Flight Planning
("Rubber banding")
Calling up a map page info
box
Selecting a #2 or #3 standby
frequency for swapping into
the active frequency slot
Changing remote transponder
mode
System Overview 1-43