Datalogs Download - BENDIXKing AeroNav 910 Pilot's Manual

AeroNav 900/880 Series Pilot's Guide

DATALOGS DOWNLOAD

Extensive data logging is performed automatically on all
AeroNavs. These datalogs can be accessed post-flight and used
for a number of purposes.
NOTE
Datalogs Usable But BendixKing Property
The contents of the data logs and the storage
devices that record and store data remain the
property of BendixKing. However, you are free to
download and use the data for your own training and
safety improvement purposes.
There are seven types of datalogs employed in the AeroNavs:

System Log – This log provides a record of the
navigation state. From this log, you can re-create many
aspects of the FMS output and AeroNav state. It logs at
a rate of approximately 1Hz

Flight Log – This log provides a detailed record of your
aircraft state as measured by the various AeroNav
sensors. It logs at a rate of approximately 5Hz

Engine Log – This log provides details on fuel flow
system data (if configured). It logs at a rate of
approximately ¼ Hz

Event Log – This log contains miscellaneous data such
as all alerts, keystrokes, system status and error
messages, etc. It is designed to be a diagnostics log for
BendixKing Service Center technicians and not expected
to be used by owners/operators. It logs at an on-
condition rate

Voltage Log – This log contains internal diagnostic data
such as the voltages and currents on sub-system boards,
temperatures and internal fan status. It logs at a rate of
approximately 1Hz

GPS Log – This log contains extensive internal state
data for the GPS
7-64 General
89000039-010
Rev 1 May 2019