BENDIXKing AeroNav 910 Pilot's Manual page 125

AeroNav 900/880 Series Pilot's Guide
right knob button to start inserting the procedure using a
dropdown. If the cursor is positioned above the airport (i.e. an
Insert Cursor), the dropdown may contain more items than just
arrivals and/or approaches. The examples below use destination
field method for clarity. After pressing the knob, the FMS will
present a dropdown from which to select the desired procedure.
The process for using the dropdowns to select the arrival and/or
approach and any enroute and runway transitions is the same as
the process for selecting a departure.
Arrivals Dropdown
When an approach is being entered, Vectors-To-Final (VTF) will
be presented in the dropdown containing approach transitions.
Since approaches do not have defined runway transitions, no
runway transition dropdown will be presented when entering an
approach.
89000039-010
Rev 1 May 2019 FMS Subsystem 3-31