BENDIXKing AeroNav 910 Pilot's Manual page 241

AeroNav 900/880 Series Pilot's Guide
Editing a Checklist
To edit an existing checklist, touch or use the bottom right
AeroNav knob to select the "Edit" button, then touch again or
push the knob putting the system in edit mode. This automatically
creates a new step at the end of the checklist – if that's what you
want, then just start typing on the keyboard. If instead, an existing
step is to be edited, then select the checklist step to be edited by
touching it or using the inner ring of the AeroNav knob. Touch
the step a second time or push the AeroNav knob to generate a
keyboard, press the CLR button (keyboard or bezel) as required
to clear characters and then re-type as required. To insert a
missing/extra step, type the step as desired as the last step of an
existing checklist and then twist the outer ring of the bottom right
AeroNav knob to insert the step in the desired location. When
done with editing the existing checklist, touch/select the "Edit"
button again to exit edit mode.
Press the "CLR" button on the bezel to return to the checklist
directory.
Selecting a Checklist
From the checklist directory, highlight the desired checklist by
either touching it or using the bottom right AeroNav knob and
then either touch the checklist title a second time or push in the
AeroNav knob to select it.
The selected checklist will then be displayed with the checklist
title along the top strip.
Using a Checklist
When a checklist is selected for use, the first step will be
highlighted by a bright blue wrap-around highlight. Either
touching a highlighted step or pushing in the AeroNav knob will
toggle that step to bright green and a green checkmark will
appear along the right edge, indicating that checklist step has
been accomplished.
Until all steps have been designated as accomplished, the bottom
left edge of the checklist box will display "Checklist Not
Completed". As soon as all steps have been designated as
89000039-010
Rev 1 May 2019 Aux Subsystem 5-17