BENDIXKing AeroNav 910 Pilot's Manual page 185

runway suppression area, no FLTA alert will be generated. Obstacle
threat bubbles can still appear inside the suppression area.
FLTA alerts are inhibited if any of the following conditions are met:

FLTA is manually turned off via the pilot-accessible "User
Options" LSK on the "SETUP" tab of the AUX page
(generates a "FLTA OFF" CAS Advisory message);

The ownship position is inside the rectangular (or circular, in
the case of no known runway orientation) FLTA Inhibit zone
depicted on the 2D map (generates a "FLTA INHIBITED"
CAS Advisory message);

The projected ground impact point along the current ground
track intersects the terrain inside that FLTA Inhibit
rectangle/circle (generates a "FLTA INHIBITED" CAS
Advisory message);

The Reduced Terrain Clearance (RTC) violation is projected
to happen inside that FLTA Inhibit rectangle/circle (generates
a "FLTA INHIBITED" CAS Advisory message).
FLTA Inhibited and Off Messages
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
Map Subsystem 4-35