Previewing Flight Plans - BENDIXKing AeroNav 910 Pilot's Manual

AeroNav 900/880 Series Pilot's Guide
If a flight plan has more legs than can be displayed on a single
page, a scroll bar is presented along the right edge of the flight
plan. It indicates where the viewable window is with respect to the
entire flight plan as well as where the active leg in the flight plan
is. In the image above, the magenta vertical rectangle in the scroll
bar indicates the active leg is just below the origin. There are a
number of flight plan legs out of sight below the bottom of the
display.
The flight plan can be displayed using a "mini" format where legs
are presented in a single row, allowing more legs to be visible on
the display. The mini format is selected on or off using the FMS
Setup page on the AUX SETUP tab). The leg is surrounded by
the cursor automatically increases its height to the full row format.
Mini Row Leg Format

PREVIEWING FLIGHT PLANS

Flight plan modifications can be previewed as they are being
modified on the FMS page, using the FPL tab with the map
partially exposed (Map-FPL split page as defined in section 1 ).
As a flight plan is being built on the right side of the page, the
map will automatically resize attempting to show the entire
modification being made. Those changes are shown on the map
using a cyan color. There may be a short delay in drawing the
89000039-010
3-6 FMS Subsystem Rev 1 May 2019