Inverting A Route - BENDIXKing AeroNav 910 Pilot's Manual

the flight plan into a stored route. At that point, the saved version
is like any other stored route.
Copy Route LSK
TIPS AND TECHNIQUES
Route Previewing
Experimentation with routes without altering the
active route (e.g. setting up multiple arrival scenarios
when still far from destination) can be accomplished
by copying the active route on the Route tab,
renaming it for clarity, and editing as desired. When
ready, activate that newly edited route. In dual
AeroNav installations, use one AeroNav to view
potential changes without affecting the active route.

INVERTING A ROUTE

To make an inverted copy of an existing stored route, move the
cursor to surround the route to be inverted and then press the
"Invert" LSK.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
FMS Subsystem 3-45