BENDIXKing AeroNav 910 Pilot's Manual page 403

touching the tab. Then, rotate the right outer knob until the
Network Configuration page is displayed.
Maintenance mode Network Configuration Page
Each network configuration is defined by three settings, as
follows:

SSID / Name - the name of the network. For a WAP
configuration, this will be the SSID transmitted by the
AeroNav. For a client configuration, this is the SSID of
the network to which the AeroNav will connect.

PSK - the network password. For a WAP configuration,
this will be the password that connecting devices will
have to enter in order to join the network. For a client
configuration, this is the password for the network to
which the AeroNav will connect.

Mode - the mode of the configuration. To define a WAP
configuration, select "Local Wi-Fi". To define a client
configuration, select "Remote Wi-Fi".
To start editing the network configurations, press the right knob
button. The first SSID/Name field will be surrounded by a cyan
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
General 7-73