Database Updates - BENDIXKing AeroNav 910 Pilot's Manual

DATABASE UPDATES

Periodic updates to nav, chart, obstacle, and terrain databases
are all made through the USB port on the front of each AeroNav.
Updates must be performed in accordance with 14 CFR Part 43,
Appendix A. Note that data updates require the use of
Maintenance Mode, which is permitted only on the ground.
NOTE
Database Currency
It is critical that you update the data regularly and
that you ensure the databases are current prior to
conducting flight operations.
The table below summarizes the database update periods:
Database
Chart Data
Nav Data
Obstacle
Data
Terrain
Data
89000039-010
Rev 1 May 2019
Update
Cycle
14 days
28 days
56 days
As required
AeroNav 900/880 Series Pilot's Guide
Comments & Source
Expiration watermark displayed
after 14 days indefinitely until
data updated (Jeppesen)
Airport, airway, navaid,
airspace, and FMS data
(Jeppesen)
Displayed on map and used for
TA and FLTA functions
(Jeppesen)
Displayed on map and used for
TA and FLTA functions
(Jeppesen). The AeroNav is
shipped from the factory with
this database already loaded
and updates are anticipated to
be a rare occurrence.
General 7-55