Charging From The Usb - BENDIXKing AeroNav 910 Pilot's Manual

CHARGING FROM THE USB

The USB port on the front of the AeroNav bezel is a USB v1.1
compatible USB port and can be used as a "high power" charger
as well.
Most devices are "low power" devices and they will fully charge
from the AeroNav bezel USB port. Some devices are "high
power" devices and need up to 2.1amps of power – these devices
can also be charged from the AeroNav USB port. The iPad is a
good example of a "high power" device and the AeroNav supports
charging.
COOL FEATURE
Charge Devices From the AeroNav USB Port
Most USB devices can be charged directly from the
USB port on the front bezel of each AeroNav while
on the ground or in flight. This can be very handy if
using a tablet or other mobile device in-flight – the
device can continue to be used without excessively
draining the battery and may even have extra
charge added in the process.
TIPS AND TECHNIQUES
Avoid Use of USB Port at Startup
If a device is plugged into the bezel USB port at
AeroNav startup, the unit will boot into maintenance
mode. Unless you are intentionally trying to enter
maintenance mode at startup, ensure there are no
devices inserted in the bezel USB port at startup.
The USB port can be used immediately after
AeroNav initialization.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
General 7-41