BENDIXKing AeroNav 910 Pilot's Manual page 49

approach). When the desired waypoint is displayed,
press the knob in to accept;

Touch the waypoint field in the pop-up green Direct-To
dialog box to generate a virtual keyboard and type in the
desired waypoint name. When the desired waypoint is
displayed, press Enter on the keypad or bezel to accept;

Twist the inner ring of the lower right AeroNav knob while
the pop-up green Direct-To dialog box is displayed to go
into edit mode. The inner ring changes the character and
the outer ring changes the cursor position in the waypoint
name field. It may not be necessary to fill in all letters of
the waypoint name since they will auto-fill. When the
desired waypoint is displayed, press Enter on the keypad
or bezel to accept.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
System Overview 1-39