BENDIXKing AeroNav 910 Pilot's Manual page 278

AeroNav 900/880 Series Pilot's Guide
Custom User Settings
5 different custom user definitions can be created which are
saved across power cycles. Each custom user definition consists
of:

User Option page selections

Map settings

FMS settings

Datablock selections
To select the desired User ID, rotate the right outer knob to select
the "User ID" row on the User Options page from the AUX-Setup
tab and then rotate the inner knob to cycle through the different
user ID definition sets. No further action is required to select the
desired user ID.
Setting/Selecting User ID
Each user ID can be uniquely named, if desired, with a maximum
of 11 characters. To create a custom name for a user ID, move
the cursor to the User ID row and select the desired ID to be
renamed. Then press the right knob button in to generate a
keyboard. Type in the desired name (do not use any spaces) and
press the ENTR key on the keyboard or on the bezel.
5-54 Aux Subsystem
89000039-010
Rev 1 May 2019