Retry Approach - BENDIXKing AeroNav 910 Pilot's Manual

RETRY APPROACH

If you had been flying a Vectors-To-Final (VTF) approach, and
the active leg of the flight plan is part of a published missed
approach, the L2 LSK displays "Retry Approach". Pressing the
L2 LSK will put the same VTF approach in the FMS flight plan
with the inbound leg to the FAF active.
NOTE
Activating Missed Approach Past MAP
If the missed approach was activated after the
Missed Approach Point (MAP), the first non-altitude
terminated leg of the published missed approach
procedure will become the active leg, regardless of
where the airplane is geographically.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
Navigation 6-35