Rnp/Rnav Operations - BENDIXKing AeroNav 910 Pilot's Manual

RNP/RNAV OPERATIONS

The AeroNav complies with the equipment requirements of AC
90-105 and meets the equipment performance and functional
requirements to conduct RNP terminal departure and arrival
procedures and RNP approach procedures without RF (radius to
fix) legs. Part 91 subpart K, 121, 125, 129, and 135 operators
require operational approval.
When installed with an SBAS approved antenna, the AeroNav
provides pilot and automatic flight control guidance for the
following operations conducted under instrument flight rules
(IFR):

VOR, LOC, ILS instrument approach procedures
(procedures using VHF radio guidance) †

RNP instrument approach procedures using the following
lines of minima:
o
LNAV minima (including when using advisory vertical
guidance from the system)
o
LNAV/VNAV minima
o
LPV minima
o
LP minima
when installed with a non-SBAS antenna, the AeroNav provides
pilot and automatic flight control guidance for the following
operations conducted under instrument flight rules (IFR):

VOR, LOC, ILS procedures (procedures using VHF radio
guidance) †

RNP instrument approach procedures using LNAV lines
of minima only.
The AeroNav complies with requirements of AC 90-100A for
RNAV1 and RNAV2 operations. In accordance with AC 90-100A,
Part 91 (except subpart K) are authorized to fly RNAV1 and
RNAV2 procedures.
The AeroNav complies with the requirements for GPS Class II
oceanic and remote navigation (RNP-10) and (RNP-4) without
time limitations. A second navigation source may be required for
these operations to meet availability requirements.
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
Navigation 6-37