BENDIXKing AeroNav 910 Pilot's Manual page 174

AeroNav 900/880 Series Pilot's Guide
Weather Product
Grouping Title/Category
Weather Layers
Airport Reports
Weather Reports
Lightning
* Product not yet displayed if the source is a SkyTrax100
Selections can be made by either touching the desired product or by
using the bottom right AeroNav knob.
Note that when there is an on-board lightning sensor selected
(BendixKing TWX670 Tactical Weather System or L3 WX500
Stormscope), the "Lightning" grouping will also include a "Clear
Strikes" function key. A WX-500 Lightning sensor test is only
available in maintenance mode.
Use the bottom right AeroNav knob to adjust altitude slices for icing
and wind products. Note that the AeroNav knob will only adjust the
weather product slice if the product is being displayed and is valid;
otherwise it still controls the map range and view.
Choices may include "METARS", "AIR/SIGMETS":

METARs – These are available in both text and graphical
formats and represent recent surface weather observations.
Text METARs are presented on the "Info" tab of the "FMS"
page. The graphical METARs are color-coded flag symbols
that summarize a recent surface weather observation and
can appear as overlays on the Map and embedded in the
flight plan on the Flight Plan tabs and Nearest tabs. These
4-24 Map Subsystem
Possible Selections Within the
Grouping
Rgnl Wx Rdr (ADS-B only)
US Wx Radar (All systems)
PR Wx Radar (Puerto Rico) (non-ADS-B)
CN Wx Radar (Canada) (non-ADS-B)
Other Wx Rdr (ADS-B only)
Storm Cells*
Icing*
Winds Aloft
Onboard Radar (optional)
METARs
AIR/SIGMETs
Datalink*
Sensor – Strike
Sensor – Cell
Sensor – Clear Strikes
89000039-010
Rev 1 May 2019