Naming A User Waypoint; Deleting A User Waypoint - BENDIXKing AeroNav 910 Pilot's Manual

AeroNav 900/880 Series Pilot's Guide
desired navaids and radials either by touching the target
field and then using the virtual keyboard or by using a
combination of twists and pushes of the bottom right
AeroNav knob to enter the data. Press the "Enter" LSK to
save that new waypoint.

Enter Place/Bearing/Distance – Press the "New" LSK
then press the "Format" LSK as required to select the
"Rad/Dist" option and enter in your desired
place/bearing/distance either by touching the target field
and then using the virtual keyboard or by using a
combination of twists and pushes of the bottom right
AeroNav knob to enter the data. Press the "Enter" LSK
to create and save that new waypoint.
Some external EFIS systems (e.g. Bendix King EFS 40/50,
Collins Pro Line 21, etc) can also create and send user waypoints
to the AeroNav. When the waypoint data is received from the
external EFIS, the AeroNav will automatically switch to the WPT
tab if not already there.

NAMING A USER WAYPOINT

Each user waypoint can be assigned a 5 character identifier that
can be used in the FMS anywhere a nav database waypoint can
be used. You can elect to use the automatically assigned 5
character identifier (format is "WP###") or re-name that as
desired. A longer description can also be attached to each user
waypoint using the "Name" field. In each case, those names can
be entered by either touching the specific field and using the
virtual keyboard or by using a combination of twists and pushes
of the bottom right AeroNav knob.

DELETING A USER WAYPOINT

There are two methods to delete an existing user waypoint.
Either highlight the waypoint to be deleted and press the "CLR"
button on the bezel, and then the "ENTR" button when the green
confirm dialog box is displayed, or, use the "Delete Waypoint"
LSK along the left edge of the display and then use the "ENTR"
button when the green confirm dialog box is displayed (or touch
the green box).
3-50 FMS Subsystem
89000039-010
Rev 1 May 2019