BENDIXKing AeroNav 910 Pilot's Manual page 39

AeroNav 900/880 Series Pilot's Guide
the decimal point. The slot being tuned is highlighted in reverse
video as shown below.
Manual Com/Nav Tuning Reverse Video
The #1 Standby frequency can also be tuned by touching the
block on the display. When using this method, a virtual keyboard
is displayed. Enter the desired frequency into the numeric
keypad and press ENTR (either on the virtual keypad or on the
bezel). The virtual keyboard will be dismissed after ten seconds
of inactivity.
The nav radio may be tuned to a VOR using the identifier of the
VOR (e.g. "GDM" for the Gardner VOR). Touch the nav radio
block to display a virtual keyboard, then enter the identifier. An
automatic, geographic-based prediction algorithm ("Geofill") is
running such that the most likely VOR station is filled in based on
your geographic position.
Manual Entry of VOR Identifier
89000039-010
Rev 1 May 2019 System Overview 1-29