BENDIXKing AeroNav 910 Pilot's Manual page 390

AeroNav 900/880 Series Pilot's Guide
NOTE
Each AeroNav Requires Separate Upload
In multiple AeroNav installations, the database
uploads must be performed individually for each
AeroNav to be updated.
TIPS AND TECHNIQUES
Due to some of the upload durations, BendixKing
recommends creating a fob for each AeroNav to be
updated so that the updates can happen in parallel
and not stacked serially, thereby extending the
overall time to accomplish a full update.
Once the loading process is complete, the list will be shown with
the load status of each item in the list. If an item was not
selected, the status will be "Skipped". If an item was successfully
loaded, the status will be "OK". If an error occurred, the status
will be "ERROR". If all items loaded successfully, a message to
that effect will the shown above the list. If not, an error message
will be displayed above the list.
Note that all of the LSKs along the left side will be removed and
that no cursor will be presented. If there is a need to get the
cursor and the LSKs back, either remove and reinsert the USB
fob, or just change tabs by touching the tab or using the AUX
button and then go back to the Update tab.
If the load was not successful, either try again using the error
message as a guide or contact BendixKing technical support.
7-60 General
89000039-010
Rev 1 May 2019