AeroNav 900/880 Series Pilot's Guide
COOL FEATURE
METAR Flags in Flight Plan
The right edge of each leg in a flight plan presents a
METAR flag for the closest reporting station, if the
station is different from the previous leg's station. The
station for which the METAR flag applies is decoded
immediately beneath the flag and may not be exactly
the same location as the leg itself.
TFRS
TFR data is also transmitted via Broadcast Datalink. Two types of
TFRs are depicted – active and pending. Active TFRs are depicted
as solid red lines and Pending TFRs are depicted as dashed red
lines, which become solid when the TFR transition time rolls from
pending to active. TFR data cannot be turned off.
Active and Pending TFRs
4-26 Map Subsystem
89000039-010
Rev 1 May 2019