Fms Setup - BENDIXKing AeroNav 910 Pilot's Manual

FMS SETUP

This is a page where some of the calculations of the FMS can be
altered for aircraft or operational tailoring. Access this page by
pressing the "Setup" LSK until "FMS" is shown. Options include:

Descent rate editing - keep these the same in dual
AeroNav installations

Transition Altitude and Level editing

Controlled airspace alerts

TFRs alerts and Special Use Airspace (SUA) alerts

Modifying list of selectable procedures for the FMS drop
down boxes

Airways

Arrivals

Departures

Approaches

Enabling Search Patterns/Circular Holds

WAAS display channel number

Flight Plan format (single row format vs. multi-row format)
Restoring factory defaults is accomplished by pressing the bottom
right AeroNav knob and then accepting the Confirm dialog box.
FMS Setup
89000039-010
Rev 1 May 2019
AeroNav 900/880 Series Pilot's Guide
Aux Subsystem 5-37