BENDIXKing AeroNav 910 Pilot's Manual page 134

AeroNav 900/880 Series Pilot's Guide

Departures – identifies the published departures
associated with the airport and when an individual row
has been selected via touch or the bottom right AeroNav
knob, it can further expand to provide a thumbnail map
depiction of the departure

Arrivals - identifies the published arrivals associated with
the airport and when an individual row has been selected
via touch or the bottom right AeroNav knob, it can further
expand to provide a thumbnail map depiction of the
arrival

Approaches - identifies the published approaches
associated with the airport including any identifier and
nav frequency, and when an individual row has been
selected via touch or the bottom right AeroNav knob, it
can further expand to provide a thumbnail map depiction
of the approach. If the nav frequency is selected by
touch or by using the bottom right AeroNav knob, it can
be nominated (copied) into the #1 standby slot †

Weather – provides four additional rows of data if known:
METAR, TAF, Winds Aloft, and Temps Aloft. Selecting
any of the additional rows via touch or the bottom right
AeroNav knob will display additional sub-category data.
Wind and temp data will represent data from the nearest
known point within approximately 30nm.
NOTE
Map Switches
Switching between the thumbnail map on the INFO
tab and the main map on the MAP tab may result in
a 1-2 second delay as the new map re-sizes.
3-40 FMS Subsystem
89000039-010
Rev 1 May 2019