BENDIXKing AeroNav 910 Pilot's Manual page 248

AeroNav 900/880 Series Pilot's Guide
Datablock Item Title
and Image
Primary Com/VLOC
(Note: This selection is
permanently grayed out
and is not actually
selectable)†
VLOC Radio†
Com/Nav Standby #2†
Com/Nav Standby #3†
5-24 Aux Subsystem
Content
Defines the position of the top two
datablocks along the left side. These
are permanently dedicated to
Com/VLOC control and display.
Provides a means to display the Active
and #1 Standby Nav frequencies in
slots 3 and 4 (2 lines)
Provides a means to display a third
com or nav frequency (second standby
slot) (2 lines)
Only available on left side datablocks
Note: If this field is currently in
datablock edit mode as indicated by a
blue background, then com/nav tuning
is disabled
Provides a means to display a fourth
com or nav frequency (third standby
slot) (2 lines)
Only available on left side datablocks
Note: If this field is currently in
datablock edit mode as indicated by a
blue background, then com/nav tuning
is disabled
89000039-010
Rev 1 May 2019