Charging the internal battery
Before using this unit for the first time or when replacing the internal
battery with a new battery, the internal battery in the AV8OR must be
charged.
Find the power connector (7) on the right side of the unit. Refer
to Figure 1-3.
Recharge the unit by either using the DC power adapter or the
120/220V AC adapter.
The LED charging indicator (4) on the unit shows a yellow light while
the unit is charging.
Figure 1-4: Charging with AV8OR turned off
When the unit is completely charged, the yellow light changes to a
green light. If the unit is turned on while charging, the charging
animation in the top right portion of the screen also displays a green
battery with full bars.
The table below shows the different charge levels.
Status
Full
Good
Medium
D200803000008
Rev 5 Mar 2012
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Honeywell Bendix/King AV8OR Handheld User's Guide
Table 1-4: Battery Charge Level
Charge
Number of bars on
Level
> 75%
> 50% & <
75%
> 25% & <
icon
5
4
3
Color
Green
Green
Yellow
Getting Started
Page 1-7