Table of Contents
Advertisement
5-58 SYSTem Subsystem
:SYSTem:HELP:HEADers?
Attribute Summary
Description
ENTER 720;Error$
PRINT Error$
Queries a listing of all the remote programming com-
mands available for the Agilent 86121A.
Preset State: none
*RST State: none
SCPI Compliance: instrument specific
Query Only
The returned ASCII string of commands is in the IEEE
488.2 arbitrary-block data format. The first line indi-
cates the total number of bytes returned to the com-
puter. That is, the # character is followed by one digit
which indicates how many of the following digits convey
the byte count. The next digits give the actual byte
count. For example, in the listing below, 4387 bytes are
indicated in the file.
Each command in the listing is separated by a linefeed
character.
The following is an example of the first few lines and
last few lines returned in the string. The term nquery
indicates that a command cannot be sent as a query.
The term qonly indicates that a command can only be
sent as a query.
#44387
:ABORt/nquery/
:CALCulate:DATA?/qonly/
:CALCulate:TRANsform:FREQuency:POINts
:CALCulate1:DATA?/qonly/
:CALCulate1:TRANsform:FREQuency:POINts
:CALCulate2:DATA?/qonly/
.
.
.
*IDN?/qonly/
*OPC
*RCL/nquery/
*RST/nquery/
*SAV/nquery/
*SRE
*STB?/qonly/
*TRG/nquery/
*TST?/qonly/
*WAI/nquery/
Advertisement
Table of Contents
