Table of Contents
Advertisement
5-30 CALCulate3 Subsystem
:CALCulate3:ASNR:CLEar
Attribute Summary
Description
:CALCulate3:ASNR:COUNt {?|{<integer> | MINimum | MAXimum }}
Attribute Summary
Description
:CALCulate3:ASNR[:STATe] {?|{ ON | OFF | 1 | 0 }}
Attribute Summary
Clears the number of measurements used in the signal-
to-noise calculation.
Preset State: not affected
*RST State: not affected
SCPI Compliance: instrument specific
This command clears the number of measurements
used in the signal-to-noise calculation. The current
measurement is used as the new reference for the sig-
nal-to-noise calculation.
Sets the number of measurements to be used for the
signal-to-noise calculation.
<integer> is a value that is within the following limits:
Constant
MINimum
MAXimum
Preset State: 100
*RST State: 100
SCPI Compliance: instrument specific
This command sets the number of measurements to be
used for the signal-to-noise calculation. If this count is
changed while the signal calculation is on, and the new
count is less than the number of measurements already
taken, the instrument will go into single measurement
mode.
Turns the average signal-to-noise ratio on or off.
Preset State: off
*RST State: off
SCPI Compliance: instrument specific
Description
10
900
Advertisement
Table of Contents
