Table of Contents
Advertisement
Cleaning Instructions
Cleaning Information
Which Cleaning Procedure should I use?
Light dirt
If you just want to clean away light dirt, observe the following procedure
for all devices:
• Use compressed air to blow away large particles.
• Clean the device with a dry cotton swab.
• Use compressed air to blow away any remaining filament left by the
swab.
Heavy dirt
If the above procedure is not enough to clean your instrument, follow one
of the procedures below. Please consult "Cleaning Instructions for this
Module" on page 91 for the procedure relevant for this instrument.
If you are unsure of how sensitive your device is to cleaning, please
contact the manufacturer or your sales distributor.
99
Agilent 81950A Compact TLS module, First Edition
Advertisement
Table of Contents
