Table of Contents
Advertisement
:CALCulate3:DELTa:PRESet
Attribute Summary
:CALCulate3:DELTa:REFerence:FREQuency{?| {<real> | MINimum | MAXimum}}
Attribute Summary
Description
:CALCulate3:DELTa:REFerence:POWer?
Attribute Summary
:CALCulate3:DELTa:REFerence[:WAVelength]{?| {<real> | MINimum | MAXimum}}
Turns off all delta measurement states.
Preset State: not affected
*RST State: not affected
SCPI Compliance: instrument specific
Command Only
Selects the reference laser line for DELTa calculations.
<real> is a frequency value that is within the following
limits:
Constant
MINimum
MAXimum
Preset State: 236.0571 THz (1270 nm)
*RST State: 236.0571 THz (1270 nm)
SCPI Compliance: instrument specific
The reference will be the laser line at the frequency
closest to the frequency entered. Subsequent measure-
ments will use the frequency closest to the reference
frequency used for the previous measurement.
The query returns the reference laser line's frequency.
The default units for the <real> parameter are Hz.
Queries the reference laser line's power level.
Preset State: not affected
*RST State: not affected
SCPI Compliance: instrument specific
Query Only
Selects the reference laser line for DELTa calculations.
<real> is a wavelength value that is within the following
limits:
CALCulate3 Subsystem 5-33
Description
181.6924 THz
236.0571 THz
Advertisement
Table of Contents
