Table of Contents
Advertisement
Procedure
C A U T I O N
Figure 8-8. Example of a static-safe workstation
1 Turn off the instrument and remove the line power
cord.
2 Place the instrument at a static-safe work station as
described in the introduction to this procedure.
3 Use a coin or screwdriver to open the printer door
that is located on the top of the instrument.
Avoid dropping the coin or screwdriver, used to open
the printer door, into the printer assembly.
4 Lift up the paper latch as shown in the following
diagram, and remove the paper.
Printer Head Cleaning Procedure 8-23
Advertisement
Table of Contents
