Table of Contents
Advertisement
iv
General Safety Considerations
W A R N I N G
W A R N I N G
There is no output laser aperture
The Agilent 86121A does not have an output laser aperture.
However, light less than 1 nw escapes out of the front-panel
OPTICAL INPUT connector. Operator maintenance or precau-
tions are not necessary to maintain safety. No controls, adjust-
ments, or performance of procedures result in hazardous
radiation exposure.
If you should ever need to clean the cabinet, use a damp
cloth only.
To prevent electrical shock, disconnect the
Agilent 86121A from mains before cleaning. Use a
dry cloth or one slightly dampened with water to
clean the external case parts. Do not attempt to
clean internally.
This is a Safety Class I product (provided with a
protective earthing ground incorporated in the
power cord). The mains plug shall only be inserted
in a socket outlet provided with a protective earth
contact. Any interruption of the protective
conductor inside or outside of the instrument is
likely to make the instrument dangerous.
Intentional interruption is prohibited.
Input Connector
Advertisement
Table of Contents
