Table of Contents
Advertisement
Table 8-3. General SCPI Error Messages (2 of 3)
Error Number
–200
–211
–213
–221
–222
–223
–224
–230
–232
–250
–252
–254
–255
–257
–258
–273
–310
–321
–350
–400
Description
Execution error
"Trigger in progress"
Caused by sending the *TRG command when the instrument is already
taking a measurement or when the instrument is in continuous
measurement mode.
"Init in process"
Caused by sending an INIT:IMM, READ, or MEASure command while a
measurement is already in progress or while the instrument is in
continuous measurement mode.
"Settings conflict"
Caused by trying to set the instrument to a state that is not allowed. For
example, turning on drift maximum and drift minimum state
simultaneously or turning on SNR state while drift or delta state is on.
Data out of range
Too much data
Illegal parameter value
"Data stale"
Caused by trying to query measurement data immediately after a *RST
command. For example, sending *RST; FETCh or sending *RST;
:CALC2:DATA? pow.
"Data questionable"
Caused by sending a resolution value in one of the measurement
functions that is outside the range of the instrument.
Mass storage error
Media missing
Media full
Dir full
File name error
Media protected
Illegal macro label
System error
Out of memory
Too many errors
Query error
Error Messages
8-7
Advertisement
Table of Contents
