Table of Contents
Advertisement
Press the power switch at the lower-left corner of the
front panel.
After a short initialization period, the display will look
similar to the figure shown below.
If the WDM channel analyzer fails to turn on properly,
consider the following possibilities:
• Is the line fuse good?
• Does the line socket have power?
• Is it plugged into the proper ac power source?
If the instrument still fails, return it to Agilent Technol-
ogies for repair.
Service" on page
Instrument firmware version
When the instrument is first turned on, the display briefly
shows the firmware version number of the instrument. In the
unlikely event that you have a problem with the WDM channel
analyzer, you may need to indicate this number when communi-
cating with Agilent.
Setting Up the WDM Channel Analyzer
Refer to "Returning the Instrument for
8-25.
1-7
Advertisement
Table of Contents
