Table of Contents
Advertisement
CALCulate2 Subsystem
:CALCulate2:DATA? {FREQuency | POWer | WAVelength}
Attribute Summary
Use the CALCulate2 commands to query corrected val-
ues frequency-spectrum data.
The commands in this subsystem have the following
command hierarchy:
:CALCulate2
:DATA?
:PEXCursion
:POINts?
:PTHReshold
:WLIMit
[:STATe]
:STARt
:FREQuency
[:WAVelength]
:STOP
:FREQuency
[:WAVelength]
Queries the corrected peak data of the input laser line.
Constant
FREQuency
POWer
WAVelength
Preset State: not affected
SCPI Compliance: standard
Query Only
CALCulate2 Subsystem 5-21
Description
Queries the array of laser-line frequencies
after the peak search is completed. If
:CALC2:PWAV:STAT is on, the power-
weighted average frequency is returned.
Queries the array of laser-line powers after
the peak search is completed. If
:CALC2:PWAV:STAT is on, the total input
power is returned.
Queries the array of laser-line wavelengths
after the peak search is completed. If
:CALC2:PWAV:STAT is on, the power-
weighted average wavelength is returned.
Advertisement
Table of Contents
